Composition: Mixture of hybrid materials modified in aqueous solution for liquid-repellent protection and SiO2.

Precautions: There is no risk in handling the product, however, in case of contact with eyes or skin, wash them with plenty of water. If irritation occurs, consult a doctor immediately.

Application: All kinds of fabric. The amount of product to be applied can vary from fabric to fabric.

How to use: Clean the surface beforehand by vacuuming the area where Ecotextil will be applied. After the surface is dry, spray the product looking for all the surface coverage. Wait 24 hours for complete drying.

Please, before applying, visit our website (www.easytechshield.com.br) to watch a full video on how to apply Ecotextil. For Ecotextil protection to work, there should be no dust or residues of detergents or fabric softeners.

Average yield: 150ml / m². This value is just a reference. Performance may vary according to the type of fabric, wear of the fabric and the experience of the person applying it. Do not apply less than the indicated yield, considering the area where Ecotextil will be applied.

Validity: 3 months after opening.

Composition: Ceramic compounds, hydrolyzed and condensed silane derivatives, SiO2.

Precautions: There is no risk in handling the product, however, in case of contact with eyes or skin, wash them with plenty of water. If irritation occurs, consult a doctor immediately.

Application: In vehicle bodywork and glass.

How to use: The surface needs to be clean, dry and decontaminated, with the use of claybar and an IPA solution preferably. Never apply on waxes or pastes. Shake the product before using. Apply a few drops to the white part of the applicator. Pass the bodywork making crossed movements (from top to bottom, from left to right), covering the entire surface of the vehicle. After spreading the product, wait 3 to 5 minutes and then, with a microfiber cloth, make a small polishing (without applying force) to remove the excess product from the bodywork. Always use a new cloth without any contaminants. Curing time: 2 hours. Do not wash the vehicle with a scrub for 7 days after application.

Average yield: 5ml to 10ml per square meter.

Validity: 3 months after opening.

Composition: Ceramic compounds derived from hydrolyzed and condensed silane, mixed with water.

Precautions: There is no risk in handling the product, however, in case of contact with eyes or skin, wash them with plenty of water. If irritation occurs, consult a doctor immediately.

Application: glass, mirrors, chrome parts, silver.

How to use: The surface must be clean and dry and free from chemical residues. Shake the bottle well. Drop a few drops of Vitreia on the glass and spread it using the applicator that comes in the box in crossed movements, covering the entire surface. I wait 3 to 5 minutes. Then use a clean, dry microfiber cloth to remove the visible layer of product, making a light circular luster. Curing time: 2 hours. Do not wash the surface for 7 days with scrubbing.

Average yield: 5ml per square meter.

Validity: 3 months after opening.

Composition: Mixture of hybrid materials modified in solution for liquid repellent protection.

Precautions: There is no risk in handling the product, however, in case of contact with eyes or skin, wash them with plenty of water. If irritation occurs, consult a doctor immediately.

Application: In shoes, belts, jackets, vehicle interiors, leather seats, synthetic leather.

How to use: Clean the surface beforehand (with a vacuum cleaner and a cloth), it needs to be free of grease or other products that promote shine. Shake the product and open the lid. Apply a few drops of Kourus to the applicator that comes with the package. Rub the product by moistening the leather over its entire surface. Preferably, carry out cross movements to ensure that the entire area will receive product protection. Wait for Kourus to dry on the leather piece. As soon as this occurs, use a clean and dry microfiber cloth to lightly polish the piece, removing excess. After that, you must wait 8 hours before using the piece, for the product to complete the anchoring.

Average yield: 5ml per square meter.

Validity: 3 months after opening.

Legacy:

Composition: Mixture of hybrid materials modified in solution for liquid repellent protection.

Precautions: There is no risk in handling the product, however, in case of contact with eyes or skin, wash them with plenty of water. If irritation occurs, consult a doctor immediately.

Application: In all types of raw wood (without treatment)

How to use: Clean the surface. After completely dry, spray Legacy on the surface, seeking all its coverage. Wait for complete drying (24 hours).

Average yield: 50ml per square meter. This income may vary according to the experience of the person applying.

Validity: 3 months after opening.

Composition: Mixture of hybrid materials modified in aqueous solution and silica dioxide.

Precautions: There is no risk in handling the product, however, in case of contact with eyes or skin, wash them with plenty of water. If irritation occurs, consult a doctor immediately.

Application: Automotive painting.

Shake the GT1 Stage bottle before use. Open the cover and seal. Don't forget to remove the cap from the GT1 Stage bottle cap to place the trigger. If not, it may leak out of the trigger base.

Never apply in the sun or with a hot vehicle. It may stain the car's paint. Do not apply on waxes or pastes. It must be applied directly to automotive paint or under the GT1 Ceramic glazing layer.

Spray GT1 Stage over vehicle paint. With the help of a microfiber cloth, spread GT1 Stage over the paint, making the application uniform until the piece is completely dry. Afterwards, use a dry and clean microfiber cloth for light polishing. Do not subject the part to liquids for 6 hours, which is the time required for GT1 Stage to fully cure. Avoid washing the part with scrubbing for 1 week from the date of application of GT1 Stage.

Applying on a dry surface: spray on a clean, dry GT1 Stage microfiber cloth until slightly moistened. Rub the cloth evenly on the surface, ensuring that the entire area receives protection. Before fully drying, use a clean, dry microfiber cloth wiping in a circular motion until the surface is dry. Do not subject the part to liquids for 6 hours, which is the time required for the GT1 Stage to fully cure. Avoid washing the part with scrubbing for 1 week from the date of application of GT1 Stage.

Average yield: 10ml to 30ml per m². It varies according to the type of application and experience of the applicator.

Validity: 3 months after opening.

Composition: SiO2 in mixture of hybrid materials modified in solution.

Precautions: There is no risk in handling the product, however, in case of contact with eyes or skin, wash them with plenty of water. If irritation occurs, consult a doctor immediately.

The glass must be clean and dry, free of wax or paste. If possible, wipe with an IPA solution to remove any grease on the surface. Never apply in the sun. If applying acid rain remover, wash the surface with an alkaline PH soap to remove chemical residues.

Shake the Rain bottle before using. Open the lid and apply a few drops on the applicator that comes with the package. Spread Rain over the entire surface of the glass by making fast and crossed movements with light pressure, from top to bottom, from left to right, seeking the entire coverage. This helps to cover all pores of the glass with the SiO2 nanoparticles. Spread evenly, without exaggeration until completely dry. After drying, use a clean and dry microfiber cloth to remove excess product until the glass looks shiny. Wait 6 hours before submitting it to liquids. Avoid washing the glass with scrubbing for 1 week from the date of application of Rain.

Validity: 3 months after opening.

Composition: Nano Silica, Naphtha, Polysilasano.

Precautions: Beware, flammable! Keep away from fire and heated surfaces. KEEP OUT OF REACH OF CHILDREN AND DOMESTIC ANIMALS. Do not ingest, in case of ingestion, do not cause contact with eyes or skin, wash them with plenty of water. If irritation occurs, consult a doctor immediately. Mandatory use of nitrile gloves for application. Shake well before using so that the product finds the ideal consistency. At low temperatures, Insignia by Motors Wash can have a similar density to the gel.

Step 01: Make sure that the vehicle body is clean, dry and free of substances such as polishing compounds or putties, waxes, glazes or sealants. Insignia By Motors Wash must be applied directly to the paint varnish. In case the paint is damaged, we recommend leveling and treating it with a specialized professional before applying the nano coating. Ideal application of IPA ETS for total decontamination of the part before starting the procedure.

Step 02: Shake the product well in the bottle so that it finds the ideal consistency. Remove the product cover and add the spray valve for application with microfiber towels. It can also be applied with nano coating applicators. Start the process by spreading the product evenly over the part, filling the entire area. When applying, you will notice a mist identifying exactly the areas that received the product, so that it will be easy to remove them. Wait 3 to 7 minutes to start the removal, using a dry microfiber cloth making circular movements, without exerting pressure. Wait 2 to 4 hours to perform water tests. Avoid washing the vehicle before 72 hours after application.

Attention: Do not polish or crystallize the Insignia By Motors Wash layer. Do not use an abrasive product. This can harm and even remove the protection provided by the product.

Validity: 3 months after opening.

Composition: Nano silica, polysilane, aliphatic hydrocarbons;

Precautions: Beware, flammable! Keep away from fire and heated surfaces. KEEP OUT OF REACH OF CHILDREN AND DOMESTIC ANIMALS. Do not ingest, in case of ingestion, do not cause contact with eyes or skin, wash them with plenty of water. If irritation occurs, consult a doctor immediately. Mandatory use of nitrile gloves and gas blocking mask for application. Shake well before use.

Apply in a well-ventilated environment and away from the sun or extremely humid environments.

Step 01: Make sure that the vehicle body is clean, dry and free of substances such as polishing compounds or putties, waxes, glazes or sealants. Insignia must be applied directly on the varnish of the painting. In case the paint is damaged, we recommend leveling and treating it with a specialized professional before applying the nano coating.

Step 02: Open the product. Use the application cloth that comes in the box with the applicator. Drip 6 to 10 drops to start the application. Start the process by making an "S" on a surface of approximately 40x40cm. Afterwards, spread the product evenly in all directions in oriented movements, ensuring complete coverage. After spreading, wait 15 to 20 seconds and start removing the excess with a clean, dry microfiber cloth. Make sure to use all sides of the cloth. Replace it if all of its faces are with product residues. For application in more than one layer, it is mandatory to do it within a maximum of 10 minutes after the first application. Wait 8 to 12 hours without testing with water. Do not wash the vehicle within 72 hours after application.

Attention: Do not polish or crystallize the Insignia 9H + layer. Do not use an abrasive product on the surface. This can impair protection provided by the product. Insginia 9H + accepts gloss corrections.

Validity: 3 months after opening.